ATK SP40-G4-B LS 408CI Stroker Short Block -29cc Dish Pistons 24 Tooth Boost/Nitrous Ready

$5,144.00

-

Lead Time: Estimated: 4 - 6 weeks

Quantity

This will also add the following products to your cart:

  • $410 Core charge - $410.00

Description

Engine Specifications:
• Block: Seasoned 6.0L Iron Gen IV with ARP main studs
• Bore/Stroke: 4.030” x 4.000”
• Displacement (cu.in): 408
• Crankshaft: Manley 4340 forged 24 tooth reluctor wheel
• Rods: Manley 4340 forged H beam 6.125” ARP 2000 bolts
• Pistons: Manley 2618 forged -29cc dished moly skirt coated
• Rings: Total Seal CS AP with steel top rings gapped for boost/nitrous
• Compression Ratios: 64cc = 9.3:1 / 68cc = 9.0:1 / 72cc = 8.7:1 (can vary due to deck height/gasket thickness)
• Camshaft Bearings: Installed & Clocked to OEM Position
• Freeze Plugs: Installed & Sealed
• Oil Galley Plugs: Installed & Sealed

Recommended Components:
• Balancer- Internal balance
• Flex plate/ Flywheel- Internal balance
• Head Gasket: .051” or per application
• Oil Pump: Melling #10295 with high pressure spring

Engine Info:
• Oil: 10W40 Non synthetic for first 3000 miles
• Oil Filter: Wix or K&N per application

Notes: ATK’s Boost/Nitrous short blocks are meant for engines running these setups. Bearing clearances and ring gap have been taken into consideration for this series of short blocks.

 

Disclaimer: The recommended components listed are ATK’s recommendations of parts to be used, applications vary and your build may need something different. Contact ATK for a recommendation if you’re not certain about a component to use. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. . ATK reserves the right to substitute parts used in engines if necessary.

Reviews

There are no reviews yet.

Be the first to review “ATK SP40-G4-B LS 408CI Stroker Short Block -29cc Dish Pistons 24 Tooth Boost/Nitrous Ready”

Your email address will not be published. Required fields are marked *